CABLE ACCESSORIES
Home / Cable Accessories
Cable Accessories
LV (1-11 KV)
MV (11-33 KV)
HV (33-66 KV)
EHV (66-245 KV)
LV Joints & Terminations
Raychem products offer excellent insulating and sealing performance with heat-shrinkable, gel and resin materials. These proven materials form the basis of straight and branch joints for voltages up to 1kV.
- Heat-shrink, resin, gel technologies
- Environmentally friendly sealants
- Quick and easy installation
- Re-instatement and energisation immediately after installation
- Solutions for all cable constructions
- Low-voltage joints for safety class cable
Raychem Rayvolve RVS kits are the easy, “roll-on” way to insulate and seal cable connections up to 1kV.
The gripping force of the specially formulated EPDM elastomer combines with a high-performance sealant to form a reliable, water-resistant, insulating sleeve that is UL listed and CSA certified for direct burial applications over in-line compression connectors. In addition, RVS kits are well suited for evaluation in other applications:
- Residential junction blocks
- Connections to secondary network protectors
- Joint covers for “Y” connections in street lighting circuits
- Cable connection for overhead bundled cable
- Environmental seals for terminal lugs and insulated airport connectors
Consistent performance in harsh environments – such as extreme temperatures, atmospheric pollution, and ultraviolet light – has proved the reliability of Raychem terminations.
- Heat-shrink technology
- Quick and easy installation
- Solutions for all cable constructions
MV Joints & Terminations
Millions of medium voltage joints have been installed on paper and polymeric cables worldwide, in the most severe service conditions, and under high electrical, thermal, mechanical and environmental stress. The reliability of the technologies is proven.
- Heat-shrink and cold-applied technologies
- Prefabricated components
- Quick and easy installation
- Easy and highly reliable installation
- Applicability to different conductor and connecting techniques
- Accommodation of tolerances, range-taking
- Suitable for different conductor cross sections and cable constructions
- Solutions for all cable constructions
Rayfit represents the new generation of heat-shrinkable jointing technology. It is based on a triple-extruded, heat-shrinkable, elastomeric joint sleeve component. The system is suitable for paper and polymeric cable constructions and is designed to accommodate modern jointing requirements such as mechanical shear bolt connectors.
- Triple-extruded body provides a pre-engineered joint unit with fewer kit components
- Advanced shrink behavior and profile-following are combined with a significant reduction in shrink time
- High recovery forces result in tight electrical interfaces and perfect sealing ability
- Optimized heat transfer due to reduced thermal capacity
- The reduced overall joint diameter provides a slimmer and space saving profile
- As an alternative to crimp connectors, kits can be selected with mechanical shear bolt connectors for conductor and shield continuity
- Unlimited shelf-life simplifies material logistics and reduces cost
Our medium-voltage terminations have been used by utilities and industrial organizations worldwide for more than four decades.
- Heat-shrink and cold applied technologies
- Proven anti-tracking, erosion- and UV- resistant insulating material for indoor and outdoor applications
- Easy and highly reliable installation
- Range-taking
- Suitable for crimp, soldered and mechanical lugs
- Resistant to breakage and vandalism
- Solutions for all cable constructions
Heat-shrinkable terminations for indoor & outdoor applications for polymeric cables up to 33kV.
Raychem’s heat-shrinkable terminations have a proven record of stability, durability and reliability over many years. Raychem’s cable accessories have been used by utilities and industrial companies.
Designed for both indoor and outdoor use in all climate conditions, the Uniterm range covers applications for polymeric cables up to 33kV. The components combine to provide the important functions such as electrical performance, stress control and moisture sealing, required for all medium voltage products.
- No sheds for indoor applications up to 33kV
- High-performance termination material
- New ceramic stress control system
- Compact design
- Few components
- Simple to install
- Mechanical robustnes
- Range takings
- Inexhaustible shelf life
Heat-shrink and cold-applied systems for switchgear and transformers with standardized bushings for 250A, 400A and 630/1250A have been installed by utilities and industrial organizations worldwide for more than 25 years.
- Heat-shrink and elastomeric technologies
- Right-angle insulating boots
- Straight insulating boots
- Separable screened adaptor systems for 250A, 400A and 630/1250A
- Separable insulated adaptor systems
- Suitable for crimp and mechanical lugs
- Plug in termination 1250A
- Easy and highly reliable installation
- Solutions for all cable constructions
- All products are available for 1c and 3c application
High-Voltage Joints & Terminations
Based on our knowledge and experience in the field of material design, we have pioneered some of the most important technical advances in cable accessory technology. Heat-shrinkable accessories are well accepted for medium-voltage distribution by utilities, equipment manufacturers and industrial users throughout the world.
For Twenty-five years, accessories have also been available for 69kV, 72kV, and 84kV transmission-voltages. For higher voltage classes we offer 145 to 170kV prefabricated joints and terminations for indoor and outdoor switchgear and transformers
- Heat-shrink and elastomeric technologies
- Cross-bonding, shield-break and external grounding facilities
- Link boxes for cross-bonding
- Mechanical lugs and connectors
- Joints and terminations proven by extensive use in the field
- Testing to international standards under the supervision of independent test institutes
- Suitable for all polymeric cables
EHV Joints & Terminations
The extra-high voltage outdoor termination (OHVT) is designed for voltages up to 245 kV. Polymeric insulated cables of various designs can be adopted with respect to shielding and metal sheath. Composite or porcelain housings with different creepage lengths are available covering the most common and also extreme pollution levels.
The termination is designed according to following standards: IEC-60840, IEC-62067, IEC-60815, IEEE-48 & IEEE-1313
Dry Self-Supporting Outdoor Termination For 145kV
Raychem’s dry self-supporting termination is designed for voltage class 145kV. It is free from any insulating liquid or gel. Polymeric insulated cables of various designs can be adopted with respect to shielding and metal sheath. The polymeric housing with long creepage length is operational under severe environmental conditions according to IEC 60071-1 1996, IEC 60071-2 1996, and IEEE-1313.1-1996.- Dry interface, no oil-filling
- Self-supporting
- Pre-fabricated and factory tested silicone-rubber stress cone
- Torque-controlled multi-contact conductor bolt
- Fast and simple installation combining GIS plug-in technology with polymeric insulators
- Isolated cable gland for sectionalisation
- Type tested according to IEC 60840
Extra-High Voltage Joints Up To 245kV
The joint is a pre-fabricated one-piece design for voltage classes up to 245 kV. Polymeric insulated cables of various designs can be adapted with respect to shielding and metal sheath. The silicone rubber joint body with integrated geometrical stress control provides proven electrical function. The joint components combine electrical performance, stress control and moisture sealing to provide the important functions required for all High Voltage products.- Pre-moulded one piece joint body
- Proven shield continuity concept
- Factory tested silicone-rubber body
- Special silicone-rubber provides perfect compression force for optimised electrical performance
- Simple assembly
- Moulded thick outer conductive screen
- Geometrical electrical stress control by moulded conductive deflectors
EHVS – Inline And Shield Break Splice From 123kV Up To 170kV
EHVS joint is a pre-fabricated three-piece design for voltage classes up to 170kV. Polymer insulated cables of various designs can be adopted with respect to shielding and metal sheath. Cross-section up to 250 mm2 is applicable.- Pre-fabricated three-piece splice design
- Using torque-controlled conductor sleeves
- Short cut-back dimensions
- Integrated moisture barrier using H/S component
- Can adapt shield-break application
- Pre-fabricated and tested Si-rubber
- Type tested according to IEC 60840 and IEEE 404 standards
EHV Dry Compact Switchgear & Transformer Termination PHVS & PHVT For 72 KV, 145 KV And 245 KV
The dry compact switchgear termination for voltage classes up to 245 kV is designed to be installed in cable entry housings of gas-insulated switchgear (GIS). It complies with IEC 62271-209 standard, which essentially specifies the interfaces between the termination and the switchgear. Therefore the termination will fit into all GIS complying with IEC 62271-209. Adapters are available to match the dimensions of wet (oil-filled) type terminations, and older designs specified in IEC 60859. The termination operates in SF6 but also in insulating liquids like transformer oil.- Dry interface, no oil-filling
- Dimensions comply with IEC 62271-209
- Pressure-tight resin housing
- Operates in SF6 and insulating liquids
- Pre-fabricated and factory tested Si-rubber stress cone
- Torque controlled or wedge-type multi-contact conductor bolt
- No special tools required to install the termination
- Isolated cable gland for sectionalisation
- Type tested according to IEC 60840, IEC 62067 and IEC 62271-209 standards