Insulation & Protection
Home / Insulation & Protection
Insulation & Protection
Surge Arrester
Raychem offers surge arresters for medium voltage power distribution systems that are designed to reliably protect your valuable assets from overvoltage. They can withstand severe outdoor exposure over long operating lifetimes and help maintain service reliability in both overhead and underground installations. Raychem arresters have passed the most rigorous tests (IEC 60099-4, ANSI C62.11, IEC 61643).
- Outdoor applications
- Indoor applications (gas-insulated switchgears, busbars)
- Motor and generator protection
- Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
- Low voltage distribution systems
- AC/DC railway applications
- Transmission line arrester.
- Modular series parallel polymeric surge arrester.
- Modular single column polymeric surge arrester.
- Polymeric housed surge arrester.
- Porcelain housed surge arrester.
- Cable sheath arrester.
Our competence in materials science is fundamental to our ability to design polymeric insulators that more than meet application requirements even for severe environments. We have worked closely with customers to optimize the design and installation of our products in some of the most challenging environments in the world. Polymeric insulators are based on our 35 years of rich experience in the field of crosslinked polymers for medium- and high-voltage applications. They consist of a polymeric housing over a pultruded fibre glass rod to which galvanized steel or aluminum end fittings are attached.
Housing materials in either ethylene vinyl acetate (EVA) or silicone are available depending on customer preference and application.
Products Range:
- Line post Insulators
- Station post Insulators
- Suspension & Tension insulators
- Hybrid post Insulators
- Hollowcore Insulators
- Railway Insulators
Indian state utilities are striving hard to come out of the red and are now aggressively investing in upgrading and strengthening the medium voltage (MV) and low voltage (LV) distribution system.
At Raychem RPG, we have identified this need of profiling the electricity losses with each utility and taking a customised approach to reduce the same. Distribution losses are attributed to three major factors, technical, societal and commercial losses.
Raychem RPG has been instrumental in developing several innovative technologies to address the issues in the Indian distribution system to Reduce losses and Maximize Profits for Indian Distribution utilities.
In our yet another endeavour for the cause, Covered Conductors have been introduced for the first time in India by Raychem RPG for applications up to 132 kV in partnership with amokabel, a Scandinavian group company and leading producer of different types of covered conductors for varied applications.
Covered Conductors are longitudinally water blocked and covered with special grades of materials that provide insulation and ultra violet protection. These conductors provide safety against accidental contact and are a major help in significantly reducing outages.
Covered Conductors have been type tested up to 66kV in line with EN50397 at CPRI and also at International labs.
Insulation enhancement systems for substations and overhead lines.Designed to prevent unplanned outages due to accidental bridging and to help upgrade insulation levels at critical points in systems.
Our competence in materials science is fundamental to our ability to design polymeric insulators that more than meet application requirements even for severe environments. We have worked closely with customers to optimize the design and installation of our products in some of the most challenging environments in the world. Polymeric insulators are based on our 35 years of rich experience in the field of crosslinked polymers for medium- and high-voltage applications. They consist of a polymeric housing over a pultruded fibre glass rod to which galvanized steel or aluminum end fittings are attached.
By insulating strategic areas it is possible to eliminate such problems and in areas of growing environmental awareness, such as the protection of endangered species, our insulation products will allow wildlife to come and go without danger of being electrocuted.
Products Range:
- Busbar Insulation Tubing BBIT/BPTM
- Busbar Insulation Tapes HVBT
- Insulating Sheets HVIS
- Preformed Covers BCIC
- Squirrel Guards BISG
- Bird Protection Caps BCIC
- Creepage Extenders HVCE
- Medium Voltage Line Cover MVLC
Personnel Protective Equipment
Elecsafe is a complete source of personnel protective equipments which are built to exceed International as well as Indian standards in electrical safety. Elecsafe range of products & solutions covers Electrical Hazards Safety, Arc Flash Protection & Fall Protection. These solutions are built not only to give you peace of mind protection but also fatigue free & comfortable working experience.
Products Range :
Advantages:
- Inherently flame resistant FR fabric – properties retained over life span
- Lightweight fabric – Ranging from 6.5 to 9 oz/yard2 for user comfort
- Unique design – Various combinations for fatigue free operation
- Stitching thread – garments made with FR rated thread
- Various ATPV values garment starting from 5 & upto 100 cal/cm2
- Heat Attenuation factor (HAF) – more than 90% to ensure minimum exposure to heat
- For higher ATPV air ventilated design garments
- Insulating properties for complete footwear & not just for soles
- 100% waterproof
Elecsafe range of dielectric shoes meets international standards as per EN 50321 ASTM standard F2413 05, ASTM F1116 F1117-08 & PPE ISO 20345-1 with DIR 89/686/EEC TOE CAP 200
- It is made with epoxy coated steel toe which can withstand 200 joules
- Specially designed rubber cleated out sole for maximum grip & slip resistance
- Oil Resistant vulcanized rubber sole for maximum grip, minimum wear & improved cut resistance
- Heat resistant up to 300deg Celsius for 30 sec.
- Complete boot tested at 20kV, 3 mins and 10 kV for 8hours
- Sole tested for 35 kV upto 3 minutes
- Shelf life – more than 10 years
- Shaft is made from yellow Polyflex dielectric compound having following durability features
- Lining – Washable knitted nylon (seamless)
- Insole – Moisture absorbing, machine washable
Elecsafe electrical insulating rubber gloves are made with highest quality rubber which gives unique benefits like:
- Tensile Strength ≥ 16MPa – Gives higher operating life
- Average elongation at break ≥ 600% – flexibility for different hand sizes
- Puncture resistance ≥ 18N/mm – Gives higher puncture resistance
- Tension set ≤ 15%- Non deforming
- Made from high quality synthetic latex rubber for better properties in less thickness
- Automated dipping process to control design variables
- Gloves voltage applications from 500V to 36kV
- Contoured design for less fatigue
- Elecsafe offers complete range of gloves in all classes and sizes
- Added benefit of resistance to acid, oil, ozone and very low temperature
- Conforms to Ageing Requirements and Flame Retardant properties
- Mechanical protection against cut, abrasion & punctures
- Manufactured with top grain cow hide leather
- Provides dual benefit of dielectrical as well as mechanical resistance
- Knitted from stretch fabric these gloves are worn to reduce discomfort due to perspiration & slippage
- Slip resistant
- Acid and oil resistant
- Hydrophobic in nature
- Fire resistant
- Halogen free flame retardant
- Mats available for 415V to 36kV voltage applications
- Higher breakdown voltage in lesser thickness
- Thickness variation from 2-7 mm as per voltage applications
- Continuous rolls of 10m in lengths